Find a certified backflow tester in Upstate SC
South Carolina requires annual tests by a state-certified tester. Greenville Water does not install or test devices. You hire a General Tester on the SCDES list, and that tester files the report.
Sources checked October 2, 2026.
South Carolina’s drinking-water rules require every public water system to run a cross-connection control program. Testable backflow assemblies are tested by a tester certified by the South Carolina Department of Environmental Services. The regulation is R.61-58.7(F).
What this site is
This is an Upstate-first guide for Greenville, Spartanburg, Anderson, Pickens, Oconee, Laurens, and Cherokee. It explains how the utilities that publish a manual describe notices and filing, and it copies General Testers from the SCDES list dated July 9, 2026.
It does not rank testers, publish star ratings, or keep a “best of” list. County pages list only certified General Testers from that report. Limited Testers are left off.
Why the annual test exists
A cross connection is a link that can let water from a private plumbing system flow back into the public supply. The annual test is how the utility checks that the assembly on your service still holds. What is backflow testing walks through the state rule. If the assembly is a reduced pressure principle assembly, RPZ testing covers that device. The order on the SCDES three-valve and five-valve sheets is on RPZ testing step by step. Double check versus reduced pressure is the hazard split between that assembly and a double check valve assembly. Your letter, not this page, names the date for your device.
Start here
- What a backflow test isThe state rule for who tests, how often, and where the report goes.
- What a backflow preventer isThe device or assembly between the public supply and a cross connection, and how to tell the types apart.
- Air gap separationThe one-inch and two-inch minimums in the published manuals, and the separate gap on a relief-valve drain.
- Preventer installationWho installs on Greenville Water, Spartanburg Water, and Anderson, and why the test is a separate step.
- Thermal expansionHeated water after a preventer or a dual check, and which relief valve each manual means.
- Greenville Water noticesPortal, test form, and the fee language in the current manual.
- How to read your noticeWhat the letter is for, and what each line on the public test form means.
- Greenville County testersGeneral Testers from the July 9, 2026 SCDES list.
- Residential backflow testingWhen a house needs a certified test, and when the utility’s dual check is the protection.
- Auxiliary water and private wellsSpartanburg Water’s well section, and how Anderson’s table lists a well.
- Master-metered and bulk waterAnderson’s definition for a one-meter complex or a system that buys through a service connection, and the other files that use those words for a utility’s own supply.
- Assembly testing for businessesWhich commercial and industrial accounts are on a testable assembly, and who may file the report.
- Restaurant backflowHow the manuals that name a restaurant classify it, and which manuals do not use the word.
- Dental office backflowHow the files that name a dental office or a clinic classify it, and which files do not use the word.
- Car wash backflowHow the files that name a car wash classify it, and which files do not use the words.
- Garage and dealership backflowHow the files that name an automotive garage or a car dealership classify it, and which files do not use the words.
- Irrigation backflow testingWhen a lawn system uses a dual check, and when it needs an annual test.
- Pressure vacuum breakerThe 12-inch height in the state rule, and how Spartanburg Water and Anderson word it.
- Fire-line backflowHow R.61-58.7(F)(5) and the three published manuals treat a dedicated fire line.
- Temporary hydrant metersWhich files put a backflow device or an air gap on a temporary hydrant, and which dollar amounts are deposits.
- Booster pumps and backpressureThe 20, 25, 30, and 50 psi lines for a pump that raises pressure, and why a pressure vacuum breaker stays off that line.
- Cost guideA third-party price range, labeled as a range, not a quote.
- Failed backflow testWhat the three published manuals require after a result that does not pass.
- Preventer repairWho arranges a repair, when it is not a full replacement, and why the assembly is tested again.
- Bypass and parallel assembliesA pipe around the assembly, a second assembly in parallel, and the detector bypass on a fire line.
- For testersHow a General Tester can claim a listing. The form is not connected yet.
- RPZ test stepsThe order on SCDES’s 2025 three-valve and five-valve sheets for a reduced pressure assembly.
- Backflow test kitsWhat SCDES requires of the differential gauge. Not a brand list and not a price.
- Test kit calibrationThe three-year gauge check in the regulation, and the annual line in the SCDES study guide.
County lists from the same SCDES file: Spartanburg, Anderson, Pickens, Oconee, Laurens, Cherokee.
Utility notes: Spartanburg Water, Greer CPW, Seneca Light & Water, Easley Combined Utilities, Blue Ridge Rural Water, Laurens, City of Clinton, Gaffney Board of Public Works, Powdersville Water, Inman-Campobello Water District, SJWD, City of Clemson, City of Pickens, City of Walhalla, Town of Pendleton, City of Westminster, Starr-Iva, West Anderson Water District, Anderson, Pickens, and Oconee. The state card types are explained on General vs Limited. Shops with chemical processes can start with the high-hazard commercial page. Official links are collected under Resources.
A note on this directory
We are not Greenville Water or SCDES. Always verify the tester’s current SCDES card. A name on this site is a row from the July 9, 2026 General Tester report, not a promise that the person will test your assembly.
Browse Greenville County testers Read your Greenville Water notice